Thrustmaster 5.1 SOUND SYSTEM User Manual page 10

AUDIO SOURCE SELECTION
If you have connected more than one peripheral device to the decoder, you can switch between them
at any time.
Press the AUDIO INPUT button on the remote control.
The DIGITAL and ANALOG LEDs indicate which input is active on the decoder.
Note: the DIGITAL LED includes both the digital optical and coaxial inputs. To switch from one to the
other, you must use the DIGITAL INPUT SW switch situated at the rear of the decoder.
SWITCHING OFF YOUR 5.1 SOUND SYSTEM HOME CINEMA
- Press the POWER button on the remote control.
The POWER LED lights up in red; the decoder is now in standby mode.
- Press the POWER button on the subwoofer.
Your 5.1 Sound System Home Cinema is now switched off.
www.thrustmaster.com
© Guillemot Corporation 2002. All rights reserved. Thrustmaster® is a registered trademark of Guillemot Corporation S.A. Dolby®,
Dolby® Surround, Dolby® Pro Logic and Dolby® Digital™ are trademarks and/or registered trademarks of Dolby Laboratories
Corporation. PlayStation® and PS one™ are trademarks and/or registered trademarks of Sony Computer Entertainment, Inc. Xbox™ is
a trademark of Microsoft Corporation in the U.S. and/or other countries and is used under license from Microsoft. GameCube™ is a
trademark of Nintendo Co., Ltd. All other trademarks and brand names are hereby acknowledged and are property of their respective
owners. Illustrations not binding. Contents, designs and specifications are subject to change without notice and may vary from one
country to another.
10/10