Additional Coffee Maker Support; Simmer Plate; Simmer Cap; Gas Burners - Siemens Hob Instruction Manual

Additional coffee maker support

Only for use on the auxiliary
burner with pans which are no
more than 12 cm in diameter.
Code HZ298114

Simmer Plate

This accessory has been
designed to reduce the level of
heat at the lowest power
setting.
Place the accessory directly on
the pan support with the cones
facing upwards, never directly
over the burner. Centre the pan
over the accessory.
Code HZ298105

Gas burners

There are indications to show which burner
each control knob operates.
It is essential to ensure that all the burner
parts and pan supports are correctly
installed for the appliance to work correctly.

Simmer Cap

This is a burner which is
exclusively suited for cooking
over a low heat. In order to use
it, it is necessary to remove the
auxiliary burner and replace it
with the Simmer Cap burner.
Code HZ298104
The manufacturer accepts no liability if
these accessories are not used or are used
incorrectly.

Switching on manually

Press the chosen burner control knob
1.
and turn it anticlockwise to the required
setting.
Use any type of lighter or flame (cigarette
2.
lighter, matches, etc.) and bring it close
to the burner.

Switching on automatically

If your hob can be switched on
automatically (ignition sparkers):
Press the chosen burner control knob
1.
and turn it anticlockwise to the maximum
power setting.
While the control knob is still pressed
down, sparks are produced on all
burners. The flame ignites.
Release the control knob.
2.
Turn the control knob to the required
3.
setting.
7