Accessories & Replacement Parts - VEXILAR EDGE 3 Owner's Manual

TEMP-ADJ
This feature allows you to calibrate the temperature reading, if
necessary.
To modify the temperature reading press...
MENU --> MENU --> MENU --> MENU (HOLD)
then -->
and then
VOLT-ADJ
This feature allows you to calibrate the voltage reading, if neces-
sary.
To modify the temperature reading press...
MENU --> MENU --> MENU --> MENU (HOLD)
then -->
and then
SYSTEM-RESET
System Reset will revert all settings back to the factory originals.
This can be handy for trouble shooting erratic operation or simply
getting the setting back to a known state.
To perform a System Reset press...
MENU --> MENU --> MENU --> MENU (HOLD)
then -->
System Reset will cause the lose of all modified settings.
-->
or .
or .
--> .
ACCESSORIES & REPLACEMENT PARTS
Depth
TBX071 107 kHz Transducer
TBX072 400 kHz Transducer
CB0001 10' Transducer Extension Cable
CB0002 20' Transducer Extension Cable
HSB003 Transducer Transom Bracket
TBH001 Transducer Transom Housing
BKT003 One-Piece Transducer ETM Bracket
ACE001 A.C.E. Transducer Adhesive
Temperature
TPX002 Temperature Probe
CB0003 10' Temp Probe Extension Cable
Mounting
GBX003 Unit Gimbal Bracket
GKX003 Gimbal Bracket Knob
PCX002 Power Cord with Fuse
Switch Boxes
SB-100* Switch Box - 2 transducers on 1 unit
SB-200* Switch Box - 2 units on 1 transducer
*You need one switch box for each beam.
15
Prices subject to change without notice
$79.00
$79.00
$24.00
$29.00
$5.00
$3.00
$18.00
$8.00
$39.00
$35.00
$20.00
$2.30
$16.00
$45.00
$45.00