Removal steps of the media card reader slot board
1
Remove the screw
, and then detach the cable.
Step
Screw (quantity)
1
M2.5 × 3 mm, flat-head, nylon-coated (1)
When installing: Ensure that the cable is attached firmly to the system board.
Remove the media card reader slot board.
1110 Fingerprint board bracket and fingerprint board
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 42
•
"1020 Bottom slot cover" on page 42
•
"1040 Hard disk drive assembly" on page 45
•
"1080 Base cover" on page 49
52
Hardware Maintenance Manual
Torque
Color
Black
0.392 Nm
(4.0 kgf-cm)