Troubleshooting - VDO CYTEC C 10 Installation And Operation Manual

Troubleshooting

This chart outlines possible malfunctions, their causes and solutions.
malfunction
irregular LCD readout
(i.e. after battery change)
speed display does not appear
display fades or disappears
possible cause
computer software is not running
smoothly
check for proper distance between
sensor and magnet
cable from sensor to computer broken
computerhead is incorrectly twisted on
handlebar holder
no wheelsize entered
battery in computer empty
temperatures below 5 C (40 F) dull
display readout
solutions
press AC-button at the rear of computer
head.
readjusting distance between sensor
and magnet.
check cable and replace if necessary.
place computerhead on handlebar
holder and twist until detent (CLICK)
enter your wheelsize
check battery power and replace it if
necessary.
back in normal temperatures, display
picks up working correctly.
GB
C
10
17