Comparison Of Current And Average Speed; Set-Up Mode - VDO CYTEC C 10 Installation And Operation Manual

11. Comparison of current and average speed

GB
Your VDO CYTEC C 10 compares your current speed with your average speed. The outcome of this comparison can be seen in
C your display by the use of symbols. No matter which information is currently displayed, this data keeps you updated on the
10 relation of your current speed and your average speed.
Your current speed is
faster than
your average
speed. Accuracy
+/- 1 KMH/MPH

12. Set-up mode

Your VDO CYTEC C 10 features the following set-up procedures
wheelsize 1 = WS1
wheelsize 2 = WS2
clock = CLK
odometer = ODO
Trip Counter=TCNT
No matter which set-up mode is used for your VDO CYTEC C10, the procedure is the same.
You can start the set-up mode for a certain display by pressing the MODE 1 button for 5 sec.
With this MODE button you may also exit the set-up mode at any time.
Once the set-up mode is activated, MODE 1 and MODE 2 buttons are covered with following instructions:
MODE1 changing from one enter display to the next enter display
MODE2 selection of figure to be entered, changing from KMH to MPH mode
10
You are currently riding
as fast as your average
speed. Accuracy
+/- 1 KMH/MPH
set-up starts out of TRP in display
set-up starts out of TRP in display
set-up starts out of CLK in display
set-up starts out of ODO in display
set up starts out of TCNT in display
Your current speed is
slower than your average
speed. Accuracy
+/- 1 KMH/MPH