When installing:
1. In models with a fingerprint reader, attach the fingerprint reader connector firmly to the system board.
2. Press the left and right top edges of the palm rest to fit it into place
3. Push the front side of the palm rest until it clicks into place
4. Close the LCD cover and turn the computer over. Then fasten the five screws to secure the palm rest.
1060 PCI Express Mini Card for wireless LAN/WiMAX
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 60
•
"1040 Keyboard" on page 65
•
"1050 Palm rest or palm rest with a fingerprint reader" on page 67
1
.
2
.
.
Chapter 8
Removing and replacing a FRU
69