Removal steps of system board assembly
1
Remove the screws
, and then detach the connectors as shown in the following illustration.
Step
Screw (quantity)
1
M2 × 3 mm, flat-head, nylon-coated (3)
When installing: Make sure that all the connectors are attached firmly.
Remove the system board in the direction shown by the arrow
1140 LCD unit
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 44
•
"1020 Optical drive" on page 44
62
Hardware Maintenance Manual
Color
Black
6
. Then detach the DC-in cable
Torque
1.85 kgf-cm
7
.