Building The Appliance In Under A Worktop - Zanussi ZU 9145 Instruction Booklet

Building the appliance in under a
worktop
The dimensions of the recessed installation area must
correspond with those indicated in the figure.
S.I.004
The appliance could be inserted between two units
(a) or as an end unit (b).
UPPER
SUPER.
D326
1. Fasten the side panel to the rear of the appliance
with the fixing brackets.
UPPER
SUPER.
E
D319
2. Fasten the appliance to the worktop or the sides,
applying the sealing strip between the refrigerator
and adjacent cabinet using the fixing brackets (E).
a
b
LOWER
INFER.
LOWER
INFER.
E
22
S.I.006
3. The appliance is equipped with adjustable support
feet. To adapt the appliance to the height of the
installation area (max 870 mm), screw in, or screw
out the feet situated at each bottom corner.
PR266
4. Separate parts A, B, C, D as shown in the figure.
PR166
5. Place guide (A) on the inside part of the furniture
door, in the upper and lower positions as shown in
the figure and mark the position of external holes.
After having drilled holes, fix the guide with the
screws supplied.
B
A
C
D
A