Grill Parts - Kenyon International 240 V Series Use & Care Manual - Installation Manual

Grill Parts

HEATING ELEMENTS
The heating elements are designed to pivot as
shown to remove/replace the baffle tray and
drip trays. They will stay in the up position. To
put down apply slight downward pressure.
BAFFLE TRAY
The baffle tray supports the drip trays, heating
elements and grates and must always be used
when operating the grill. The cross bar must
also be installed to support the elements and
grates.
DRIP TRAYS
The disposable drip trays collect all the fat and
juices created during the cooking process.
The drip trays must be emptied after each use.
When replacing the drip trays, position the drip
trays so that they are completely contained
inside the baffle tray and insuring that the side
or the rim of the drip trays do not protrude
outside of the baffle tray. (see Fig. 12)
To prevent the contents of the drip trays
from smoking, place 1 cup of water (or
enough to cover the bottom of the pan)
in the drip trays before cooking. The
replacement for the disposable drip tray is
Kenyon part #B96001.
GRATES
Grates must be cleaned after every use. The
grates have a nonstick coating for ease of
cleaning. Wash grates after each use in warm
soapy water.
17
Drip trays must be contained
inside of heat baffel as shown
GRATES
CROSS BAR
DRIP TRAYS
BAFFLE
TRAY
HEATING
ELEMENT
Fig. 11
Element support
bar must be in place
as shown
Fig. 12