Kenyon International 240 V Series Use & Care Manual - Installation Manual page 15

CALIBRATION
Upon application of electrical power to the
grill, the controller will run a self-calibration
process. The controller will then sound an
audible confirmation tone and the display will
briefly illuminate. The grill is now ready to be
used.
HEAT SETTINGS
Your Texan Grill has 8 different heat settings,
1 through 8, selected using the (-) and (+)
sensors. The heat setting is displayed as
shown at the right. The heating element
cycles at different time intervals to vary the
heat level. As the setting is increased, the
heating element will remain on for a longer
period, increasing the cooking temperature of
the grill.
HOT SURFACE INDICATOR
Your Texan Grill is equipped with a hot surface indicator for each grill element. An indicator
illuminates when it's respective element is activated. It will remain illuminated after the element is
de-energized for a period of up to 30 minutes until the grill has cooled. See Fig. 8.
LOCK FUNCTION
The lock function allows the user to lock the control and the heat level can only be decreased or
the element de-energized. When locked an element can not be energized if not prior to locking,
and the heat level can not be increased. To activate or de-activate the lock function, touch the
lock button for 3 seconds. A light will illuminate to indicate the control is locked.
15
Fig. 9
POWER
LEVEL
DISPLAY
(HEAT
SETTING 8
SELECTED)
Fig. 10