Harman Kardon AVR 745 Owner's Manual page 17

29510_AVR745_Engelsk 30/10/06
Installation and Connections
Figure 1:
SCART/Cinch-Adapter for
playback;
signal flow:
SCART → Cinch
Figure 2:
SCART/Cinch-Adapter for
record and playback;
signal flow:
SCART ↔ Cinch
Figure 3:
Cinch/SCART-Adapter for
playback;
signal flow:
Cinch → SCART
Figure 4:
SCART/S-Video Adapter
for playback;
signal flow:
SCART → Cinch
Figure 5:
SCART/S-Video Adapter
for record and playback;
signal flow:
SCART ↔ Cinch
Figure 6:
SCART/S-Video Adapter
for playback;
signal flow:
Cinch → SCART
9:31 Side 17
Black
Black
Yellow
Yellow
Red
Red
Rot
Red
Schwarz
Black
S-Video Out S-Video Out
1
Also other colours possible, e.g. brown and grey.
Important Note for the Use of
Black
Black
SCART-Cinch Adapters:
Yellow Yellow
When video sources are connected to the TV
Red
directly with a SCART cable, specific control
Red
signals apart from Audio/Video signals will be
fed to the TV. These specific signals are: With all
video sources, the signal for automatic input
Black
Black
selection that switches the TV automatically to
Red Red
the appropriate input as soon as the video
Blue Blue 1
source is started. And with DVD players, the
Yellow
Yellow
signals automatically turning the TV to 4:3/16:9
Green
format (with 16:9 TVs or with 4:3 TVs with
Green 1
selectable 16:9 format) and turning the RGB
White
White
video decoder of the TV on or off, depending on
the DVD player´s setting. With any adapter cable,
these control signals will be lost and the
appropriate setting of the TV must be made
manually.
Note for RGB signal with SCART:
If you use a unit providing RGB signals on a
SCART output (as e.g. most DVD players do) and
Rot
Red
you want to use that RGB signal, this SCART
Schwarz
Black
output must be connected directly to your TV.
Although the AVR can switch three-way video
S-Video In S-Video In
signals (like component signals Y/Pb/Pr), most
TVs need separate sync signals for RGB (also
with SCART) that cannot be switched and pro-
Black Schwarz
vided by the AVR.
Red
Rot
RGB signals can be pathed through the AVR only
Blue
Blau 1
when no separate sync signal is needed (see last
Yellow Gelb
"Video Connection Note" on page 16).
S-Video In S-Video In
S-Video Out
S-Video Out
INSTALLATION AND CONNECTIONS 17