1. Manuals
  2. Brands
  3. Harman Kardon Manuals
  4. Receiver
  5. AVR 5000
  6. Owner's manual

Harman Kardon AVR 5000 Owner's Manual

Harman-kardon stereo receiver user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

AVR 5000 Audio/Video Receiver
OWNER'S MANUAL
DTS
MUTE
RDS
PTY
CT
RT
TA
AUTO
TUNED ST
MEMORY PRESET
SLEEP
DOLBY D
PCM
MP3
OPTICAL
1 2 3
COAXIAL
1 2 3
ANALOG
OSD
VMAx NF
5.1 LOGIC 7 CM
PRO LOGIC
3-STEREO
5 CH STEREO HALL 12
DIGITAL
THEATER
L
0
C
0
R
LS
RS
LFE
NIGHT
MULTI
Power for the Digital Revolution
®
™

Advertisement

Table of Contents
loading

Related Manuals for Harman Kardon AVR 5000

Summary of Contents for Harman Kardon AVR 5000

  • Page 1 AVR 5000 Audio/Video Receiver OWNER’S MANUAL MUTE AUTO TUNED ST MEMORY PRESET SLEEP DOLBY D OPTICAL 1 2 3 COAXIAL 1 2 3 ANALOG VMAx NF 5.1 LOGIC 7 CM PRO LOGIC 3-STEREO 5 CH STEREO HALL 12 NIGHT MULTI...

  • Page 2: Table Of Contents

    Table of Contents 3 Introduction 4 Safety Information 5 Front Panel Controls 7 Front Panel Information Display 9 Rear Panel Connections 11 Main Remote Control Functions 14 Zone II Remote Control Functions 15 Installation and Connections 19 System Configuration Speaker Selection and Placement First Turn On and Use of OSD Settings to be Made With Each Input Used...

  • Page 3: Introduction

    To make it easy to operate the AVR 5000 from a remote room, a separate Zone II remote is included.

  • Page 4: Safety Information

    Safety Information Important Safety Information Verify Line Voltage Before Use Your AVR5000 has been designed for use with 220-240-Volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

  • Page 5: Front Panel Controls

    Front Panel Controls Main Power Switch System Power Control Power Indicator Headphone Jack Selector Buttons Tone Mode Surround Mode Selector Tuning Selector Tuner Band Selector Preset Stations Selector Main Power Switch: Press this button to apply power to the AVR5000. When the switch is pressed in, the unit is placed in a Standby mode, as indicated by the amber LED sur-...
  • Page 6 Front Panel Controls Surround Mode Selector: Press this but- ton to change the surround mode by scrolling through the list of available modes. Note that Dolby Digital and DTS modes can be selected only when a digital input is used (See page 28 for more information about surround modes.) Tuning Selector: Press the left side of the button to tune lower frequency stations and the...

  • Page 7: Front Panel Information Display

    Front Panel Information Display MUTE DOLBY D 1 2 3 OPTICAL DIGITAL Bitstream Indicators Optical Source Indicators DTS Mode Indicator Dolby Digital Indicator Coaxial Source Indicators Dolby Pro Logic Indicator Analog Input Indicator Dolby 3 Stereo Indicator VMAx Mode Indicator 5 Channel Stereo Indicator Logic 7 Mode Indicators Bitstream™...
  • Page 8 Front Panel Information Display Preset Indicator: This indicator lights when the tuner is in use to show that the Preset Number/Sleep Timer is showing the sta- tion’s preset memory number. (See page 33 for more information on tuner presets.) Sleep Indicator: This indicator lights when the Sleep function is in use.

  • Page 9: Rear Panel Connections

    Rear Panel Connections Tape Inputs Tape Outputs Video 1 Audio Inputs AM Antenna Video 1 Audio Outputs DVD Audio Inputs FM Antenna CD Inputs 6-Channel Direct Inputs Multiroom Outputs Preamp Outputs Subwoofer Output Video Monitor Outputs Amplifier Inputs Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.
  • Page 10 Rear Panel Connections Video Monitor Outputs: Connect these jacks to the composite and/or S-Video input of a TV monitor or video projector to view the on- screen menus and the output of any video source selected by the receiver’s video switcher. Amplifier Inputs: When the jumper pins that link the Preamp Outputs with these...

  • Page 11: Main Remote Control Functions

    Main Remote Control Functions Power On Button IR Transmitter Window Program/SPL Indicator Power Off Button Input Selectors AVR Selector AM/FM Tuner Select Learn Button Test Button Sleep Button Surround Mode Selector Night Mode Channel Select Button Buttons Button Set Button Digital Select Numeric Keys Tuner Mode...
  • Page 12 AVR 5000’s remote code memory and it is also used as a level indicator when using the remote’s EzSet capabilities.
  • Page 13 Volume Up/Down: Press these buttons to raise or lower the system volume. TV/Video Button: This button does not have a direct function on the AVR 5000, but when used with a compatibly programmed VCR, DVD or satellite receiver that has a “TV/Video”...

  • Page 14: Zone Ii Remote Control Functions

    Harman Kardon CD, DVD or cassette decks in the same room, or from a remote room when an IR link is connected to the AVR 5000. NOTE: The Zone II remote may be used in either the same room where the AVR5000 is located,...

  • Page 15: Installation And Connections

    Installation and Connections After unpacking the unit, and placing it on a solid surface capable of supporting its weight, you will need to make the connections to your audio and video equipment. Audio Equipment Connections We recommend that you use high-quality inter- connect cables when making connections to source equipment and recorders to preserve the integrity of the signals.
  • Page 16 You must switch to the standard composite or S-Video input on your TV to view those menus. • The AVR 5000’s component video system is designed for standard video rate video from DVD players and similar devices. While it may...
  • Page 17 SCART output (as e.g. most DVD players do) and you want to use that RGB signal, this SCART output must be connected directly to your TV. Although the AVR 5000 RDS can switch three- Schwarz Black way video signals (like component signals...

  • Page 18: System And Power Connections

    External Audio Power Amplifier Connections If desired, the AVR 5000 may be connected to optional, external audio power amplifiers or used with equalizers or speaker systems that require connection between the preamp and amplifier sections of a receiver.

  • Page 19: System Configuration

    System Configuration When all audio, video and system connections have been made, there are a few configuration adjustments that must be made. A few minutes spent to correctly configure and calibrate the unit will greatly add to your listening experience. Speaker Selection No matter which type or brand of speakers is used, the same model or brand of speaker...

  • Page 20: First Turn On And Use Of Osd

    System Configuration First Turn On and Use of the OSD Once the speakers have been placed in the room and connected, the remaining steps are to program the system configuration memories. With the AVR5000 two kind of memories are used, those associated individually with the input selected, e.g.

  • Page 21: Input Setup

    Selection of the Digital Coax 3 jack as an output will remain effective as long as the AVR 5000 is on. However, once the unit is turned off, the jack will revert to its normal use as an input when the unit is turned on again.

  • Page 22: Speaker Setup

    System Configuration Speaker Setup This menu tells the AVR5000 which type of speakers are in use. This is important as it adjusts the settings that determine which speak- ers receive low frequency (bass) information. For each of these settings use the setting if the speakers for a particular position are tradi- tional full-range loudspeakers that are capable...

  • Page 23: Adjustments For Other Inputs

    System Configuration At this line you will select the frequency at which bass information is directed to the Subwoofer Output . The choices available will depend on the setting made previously for the front left/right speakers. When making these selec- tions, choose the crossover frequency that is clos- est to the lower frequency limit of your front left/right speakers or, if using large full range...

  • Page 24: Night Mode Settings

    System Configuration and the surround speakers are 1 m away, the optimal delay time is figured as (3–1)x3+15=21. Thus, in this example, the Pro Logic delay should be set at twenty mil- liseconds. NOTE: The DTS, Logic 7, 5CH Stereo, Hall and Theater modes use a fixed, nonadjustable delay time.

  • Page 25: Using Ezset

    System Configuration Using EzSet Harman Kardon’s exclusive EzSet remote makes it possible to quickly and accurately set the AVR5000’s output levels without the use of a sound pressure meter, although manual adjust- ment is also available. However, for the easiest set-up, follow these steps while seated in the lis- tening position that will be used most often: 1.
  • Page 26 System Configuration Continue to adjust the individual speakers until they all have the same volume. Note that adjust- ments should be made with the buttons on the remote only, NOT the main vol- ume controls. You may also adjust the output levels manually while using the level indication feature of the EzSet remote.

  • Page 27: Operation

    Operation Basic Operation Once you have completed the setup and configu- ration of the AVR5000, it is simple to operate and enjoy. The following instructions should be followed for you to maximize your enjoyment of your new receiver: Turning the AVR5000 On or Off •...

  • Page 28: Surround Mode Chart

    Operation Surround Mode Chart MODE FEATURES DOLBY DIGITAL Available only with digital input sources encoded with Dolby Digital data. It provides up to five separate main audio channels and a special dedicated Low Frequency Effects channel. Available only with digital input sources encoded with DTS data. Available on special DVD, LD and audio-only discs, DTS provides up to five separate main audio channels and a special dedicated low frequency channel.

  • Page 29: Surround Mode Selection

    DTS. When an HDCD encoded disc is being played (see below) and the CD player is connect- ed to the AVR 5000 via a digital connection, select Surround Off as the Surround mode to enjoy the benefits of the HDCD process.
  • Page 30 PCM signals from any DVD or CD player, connected to a digital input on the AVR 5000, no matter what type of CD or DVD is played and even when normal, Non-HDCD-compatible players are used (only a digital output is needed).

  • Page 31: Tape Recording

    Operation can be played with all surround modes, also with the most effective Logic 7. ® : When this indicator lights in con- junction with the PCM indicator, the CD that is playing is encoded using the special High Definition Compatible Digital ®...

  • Page 32: Output Level Trim Adjustment

    Once changed to an output, the setting will remain as long as the AVR 5000 is turned on, unless the setting is changed in the OSD menu system, as described above. Note, however, that once the AVR 5000 is turned off, the setting is cancelled.

  • Page 33: Channel Direct Input

    Operation 6-Channel Direct Input The AVR5000 is equipped for future expansion through the use of optional, external adapters for formats that the AVR5000 may not be capable of processing. When an adapter is connected to the 6-Channel Direct Input , you may select it by pressing the 6-Ch Direct Input Selector .

  • Page 34: Rds Operation

    Operation RDS Operation The AVR5000 is equipped with RDS (Radio Data System), which brings a wide range of information to FM radio. Now in use in many countries, RDS is a system for transmitting station call signs or network information, a description of station program type, text messages about the station or specifics of a musical selection, and the correct time.
  • Page 35 Operation • : Jazz Music • : Country Music • : National Music • : Oldies Music • : Folk Music • : Documentary Programs • : Emergency Test • : Emergency Broadcast Information You may search for a specific Program Type (PTY) by following these steps: 1.

  • Page 36: Advanced Features

    Advanced Features The AVR5000 is equipped with a number of advanced features that add extra flexibility to the unit’s operation. While it is not necessary to use these features to operate the unit, they pro- vide additional options that you may wish to use.

  • Page 37: Semi Osd Settings

    Advanced Features Semi-OSD Settings The semi-OSD system places one line messages at the lower third of the video display screen whenever the Volume, Input Source, Surround mode or tuner frequency of any of the configura- tion settings are changed. The semi-OSD system is helpful in that enables you to have feedback on any control changes or remote commands using the video display when it is difficult to...

  • Page 38: Multiroom Operation

    Multiroom Operation The AVR5000 is fully equipped to operate as the control center for a multiroom system with optional remote external Infrared (IR) sensors, speakers and power amplifiers. Although some multi-room installations will require the services of a specially trained installer, it is possible for the average do-it-yourself hobbyist to install a simple remote room system.

  • Page 39: Programming The Remote

    Programming the Remote The AVR5000 is equipped with a powerful remote control that will control not only the receiver’s functions, but also most popular brands of audio and video equipment, including CD players, TV sets, cable boxes, VCRs, satellite receivers and other home-theater equipment. Once the AVR5000’s remote is programmed with the codes for the products you own, it is possible to eliminate most other remotes and replace...

  • Page 40: Code Readout

    Programming the Remote Code Readout When the code has been entered using the Auto Search method, it is always a good idea to find out the exact code so that it may be easily reentered if necessary. You may also read the codes to verify which device has been programmed to a specific Control Selector button.

  • Page 41: Macro Programming

    The red light under the Input Selector will blink and then turn off. Example: To program the Macro 1 button so that it turns on the AVR 5000, TV and a Sat- Receiver, follow these steps: • Press the Macro 1 button and Mute buttons at the same time and then release them.

  • Page 42: Programmed Device Function

    AVR 5000. 42 PROGRAMMING THE REMOTE Notes on Using the AVR5000 Remote With Other Devices.

  • Page 43: Channel Control Punch-Through

    TV, you may wish to start or stop your VCR or DVD without having to change the device selected by the AVR 5000 or the remote. To pro- gram the remote for Transport Control Punch- Through, follow these steps: 1.

  • Page 44: Function List

    Function List 44 FUNCTION LIST Button Name AVR Function Power Off Power Off Power On Power On Mute Mute AVR Select DVD Input Select CD Input Select Tape Tape Input Select VID 1 Video 1 Select VID 2 Video 2 Select VID 3 Video 3 Select VID 4...
  • Page 45 Function List Button Name Tape Power Off Power Off Power On Power On Mute Tape Tape Select VID 1 VID 2 VID 3 VID 4 Learn AM/FM 6 Ch. Select Sleep Test Volume Up Surround Select Night Multi Room Volume Down Channel/Guide Speaker/Menu Digital/Exit...

  • Page 46: Setup Code Tables

    Setup Code Table: TV Maker (Brand) Name Code Number (3digit) List AIWA 340 341 AKAI 019 049 ALBA 044 049 AMSTRAD 004 011 ARC EN CIEL 029 034 ARCAM 029 272 ASTRA ATLANTIC 050 113 AUDIOSONIC 031 076 195 BANG & OLUFSEN BARCO 310 326 BEKO...
  • Page 47 Setup Code Table: TV (continued) Maker (Brand) Name Code Number (3digit) List HANSEATIC 018 049 HIFIVOX 029 034 HITACHI 007 009 168 171 IMPERIAL 002 044 INTERVISION 342 343 INTERFUNK 049 063 090 117 ITT-NOKIA 090 097 171 172 018 103 KARCHER 003 020 KATHREIN...
  • Page 48 Setup Code Table: TV (continued) Maker (Brand) Name Code Number (3digit) List RBM(UK) REDIFFUSION 059 105 REDIFFUSION(UK) 150 162 REDIFUSION 104 105 036 040 354 355 ROADSTAR 031 195 ROTEL 056 065 SABA 014 017 120 133 SALORA 033 075 SAMPO SAMSUNG 050 063...
  • Page 49 Setup Code Table: TV (continued) Maker (Brand) Name Code Number (3digit) List WESTINGHOUSE 063 094 WESTON YOKO 050 195 ZANUSSI 036 040 Setup Code Table: VCR Maker (Brand) Name Code Number (3 digit) List AIWA 039 044 AKAI 028 035 AKURA 029 112 ALBA...
  • Page 50 Setup Code Table: VCR (continued) Maker (Brand) Name Code Number (3 digit) List FISHER 008 015 FUJITSU FUNAI 039 148 GRANADA(UK) GBC(UK) 054 084 GOLDSTAR 036 055 GOODMANS 029 039 GRAETZ 044 045 GRAETZ(ITT) GRANADA 001 015 GRANADA(UK) 018 054 GRUNDIG 054 086 HANSEATIC...
  • Page 51 Setup Code Table: VCR (continued) Maker (Brand) Name Code Number (3 digit) List PANASONIC 017 071 PATHE' MARCONI 044 045 PHILIPS 006 041 PIONEER 047 054 PROLINE 039 148 QUELLE 011 042 RADIOLA 049 091 060 062 REALISTIC 008 015 REDIFFUSION 004 007 ROADSTAR...
  • Page 52 Setup Code Table: CD Maker (Brand) Name Code Number (3 Digit) List AIWA 072 111 AKAI 050 177 ARCAM AUDIOMECA 044 064 CALIFORNIA AUDIO 015 109 CAPETRONIC CROWN DENON 187 188 FISHER 023 055 FUNAI GOLDSTAR (LG) 016 087 GRUNDIG 220 224 HAITAI 099 214...
  • Page 53 Setup Code Table: CD (continued) Maker (Brand) Name Code Number (3 Digit) List THORENS TOSHIBA 013 074 UNIVERSUM (QUELLE) 220 222 YAMAHA 019 031 Setup Code Table: CBL Maker (Brand) Name Code Number (3digit) List BT CABLE CABLETIME 008 011 CLYDE CABLE VISION DECSAT CANAL FILMNET...
  • Page 54 Setup Code Table: SAT Maker (Brand) Name Code Number (3digit) List AIWA AKAI ALBA 001 017 AMSTRAD 071 097 ANKARO 051 121 ASTRA 068 098 ASTRO 175 176 177 178 179 180 181 182 BLAUPUNKT 038 090 BRUNS BUSH 024 048 BUSH(UK) CAMBRIDGE CAMBRIDGE ARD200...
  • Page 55 Setup Code Table: SAT (continued) Maker (Brand) Name Code Number (3digit) List RADIOLA RADIX SAKURA 054 057 SALORA 034 068 SAMSUNG 080 127 SCHAUB LORENZ 088 099 SCHNEIDER SIEMENS 038 090 SKY MASTER SKYLAB TANDBERG TANDY 085 122 TECHNISAT 005 006 TELECOM TELEFUNKEN THORN-FERGUSON...

  • Page 56: Troubleshooting Guide

    Troubleshooting Guide SYMPTOM CAUSE Unit does not function when Main • No AC Power Power Switch is pushed Display lights, but no sound • Intermittent input connections or picture • Mute is on • Volume control is down Sound is heard, but Front-Panel •...

  • Page 57: Technical Specifications

    Technical Specifications Audio Section Stereo Mode Continuous Average Power (FTC) 80 Watts per channel, 20Hz–20kHz, @ < 0.07% THD, both channels driven into 8 ohms Five-Channel Surround Modes Power Per Individual Channel Front L&R channels: 70 Watts per channel, @ < 0.07% THD, 20Hz–20kHz into 8 ohms Center channel: 70 Watts, @ <...
  • Page 58 250 Crossways Park Drive, Woodbury, New York 11797 www.harmankardon.com Harman Consumer International: 2, route de Tours, 72500 Château-du-Loir, France © 2000 Harman Kardon, Incorporated Part No.: J90200012200...

Table of Contents