Alarm; Control Lock - Smeg Fridge-freezer User Manual

4. Use the corresponding temperature
buttons to set the temperatures of the
fridge and freezer. The desired
temperature will flash on the display.
5. After approximately 5 seconds of button
inactivity, the actual temperature of the
compartment will be displayed.
The other buttons are disabled
when setting.

Alarm

The alarm sounds to warn of the following:
The fridge door has been open for more
than a minute (continuous buzzer with
relative red light on)
• Press the alarm button
fridge door to deactivate the buzzer and
switch off the red light.
The temperature inside the refrigerator
or freezer compartment is too high
(intermittent buzzer, flashing display and
light on)
• Press the alarm button
the buzzer.
• The red light and the flashing
temperature on the display turn off
automatically when the refrigerator
compartment or the freezer compartment
reach the previously set temperature.
12
Use
• If the freezer compartment does not

Control lock

1. Press the alarm button
or close the
2. Press the alarm button
to deactivate
reach the required temperature within 24
hours of the alarm being turned off, it will
sound again.
When the appliance is first turned
on, the alarm will not sound for the
first 24 hours to allow the
appliance to reach the set
temperatures.
The control lock is a device that
protects the appliance from
accidental or inappropriate use.
seconds to turn on the control lock. The
and symbols flash for 3
seconds.
seconds to turn it off.
When the control lock is active,
only the alarm button
active. Pressing any other button
makes the
appear on the displays for 3
seconds.
for 3
again for 3
is
and symbols