Configuring An Erased Drive - Maxtor BlackArmor User Manual

Configuring an Erased Drive

After you've erased a BlackArmor drive, you must configure the drive and set a drive
password.
To configure the drive,
Step 1: Enter the 25-character identification code printed on the drive label.
Step 2: Enter and confirm a drive password.
Step 3: Click Set.
Erasing a BlackArmor Drive
When the drive has been erased (this takes only a few moments), the Configure
BlackArmor window opens:
Figure 105: Configure BlackArmor
The password must contain between 6 and 32 characters.
Maxtor Black Armor
93