Yamaha LS2000 Owner's Manual page 77

4
M
AINTENANCE
3) Rinse the engine and bilge areas
with fresh water. Drain off all water
and wipe up remaining moisture
with clean, dry rags. Reinstall the
drain plugs.
4) Spray the exterior of the engines
with Yamaha Silicone Protectant
and Lubricant.
5) Wax the hull with a non-abrasive
wax such as Yamaha Ultra Gloss
Cleaner Wax or other wax designed
for marine gelcoat.
WARNING
Slippery
can cause falls and injury. Be care-
ful not to apply too much wax on
deck and gunnel stepping surfaces.
This will make them slippery.
6) Wipe all vinyl and rubber compo-
nents, such as the seats and engine
compartment seals, with a vinyl pro-
tectant such as Yamaha Protectant.
& C
ARE
7) Vacuum and or hose off the carpet-
Always dry the carpet face up. Never
roll up the carpet while wet. Never
fold the carpet.
8) Wash the bimini fabric with a mild
surfaces
4-4
ing as necessary. If needed, use a
quality brand-name carpet cleaner
product to clean soiled areas. Roll
up the carpet face out for storage.
CAUTION:
detergent, then rinse and allow to
dry thoroughly before storage. See
the care label on the bimini top for
detailed instructions.