Something Not Working - Tricity Bendix SE551 Operating & Installation Instructions Manual

Slip in electric cooker
Table of Contents

Advertisement

SOMETHING NOT WORKING?

Please carry out the following checks on your appliance before calling a Service Engineer. It may be that the
problem is a simple one which you can solve yourself without the expense of a service call.
In-guarantee customers should make sure that the checks have been made as the engineer will make a
charge if the fault is not a mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service calls.
PROBLEM
The grill and oven do not work.
The grill does not work or cuts out after being used
for a long period of time.
The indicator neon is not working correctly.
The oven is not cooking evenly.
The oven light fails to illuminate.
The oven fan is noisy.
The oven temperature is too high or too low.
POSSIBLE SOLUTION
Check that the appliance has been wired in to the
appliance supply and is switched on at the wall.
Check that the main appliance fuse is working.
If you have checked the above:
Allow the appliance to cool for a couple of hours. The
appliance should now be working normally.
Leave the grill door open and allow the grill to cool. After
a couple of hours check that the grill works as normal.
Check that you have selected only the function you
require. Ensure all other controls are in the Off position.
Check that the appliance is correctly installed and is
level.
Check that the recommended temperatures and shelf
positions are being used.
The oven light bulb may need replacing.
Check that the oven is level.
Check that the shelves and bakeware are not vibrating in
contact with the oven back panel.
Check that the recommended temperatures and shelf
positions are being used.
temperature up or down by 10°C to achieve the results
you want.
23
Be prepared to adjust the

Advertisement

Table of Contents
loading

Table of Contents