Control Knobs; Residual Heat Indicator; Operating The Appliance; Setting The Heat Setting - Zanussi ZKF 650 LN Installation And Operating Istructions

Control Knobs

The cooking power can be set anywhere between
level 1 and 10.

Residual heat indicator

The residual heat indicator lights up, as soon as the
corresponding cooking zone is hot.
1
Danger! Risk of burns from residual heat. Af-
ter being switched off, the cooking zones need
some time to cool down. Look at the residual
heat indicator.
2
Residual heat can be used for melting and
keeping food warm.

Operating the appliance

3
When a cooking zone is switched on, it may
hum briefly. This is a characteristic of all ce-
ramic glass cooking zones and does not im-
pair either the function or the life of the
appliance.

Setting the heat setting

Heat setting
To increase
To reduce
switch off
1. When boiling water/searing food, select a high
heat setting.
2. As soon as steam forms or the fat or oil is hot, set a
lower heat setting.
3. To end the cooking process, turn to the Off posi-
tion.
6
1
10
0
Ring control knob
turn clockwise
turn anti-clockwise
lowest power
highest power
Off position
0
Knob setting
1 - 10
10 - 1