Introduction And Warnings - Hunter 30408 Owner's Manual

At A Glance
Introductions and Warnings
Congratulations! You've purchased one of the most advanced products available on
the market today to improve indoor air quality.
The Hunter ® Total Air Sanitizer captures most airborne pathogens "germs, viruses,
mold, and mildew" that enter the system. Hunter's patented technology then kills
virtually everything that has been captured within 24 hours of entering the system.
IMPORTANT SAFETY INSTRUCTIONS! READ AND SAVE ALL
INSTRUCTIONS BEFORE USING THIS AIR SANITIZER.
WARNING! RISK OF ELECTRIC SHOCK
1. These service instructions are for use by qualified personnel only. To reduce the risk
of electric shock, DO NOT perform any servicing other than that contained in these
operating instructions.
2. This air sanitizer is designed for use on a flat, level floor and may not work properly on
an uneven floor. ALWAYS place the air sanitizer on a firm, level floor. ALWAYS place
the air sanitizer at least six (6) inches away from walls and heat sources such as stoves,
radiators, or heaters.
3. This air sanitizer is intended for indoor use only.
4. This air sanitizer is not intended for commercial or hospital use.
5. Place the air sanitizer in an area that is out of the reach of children.
6. Before using the air sanitizer, extend the cord and inspect for any signs of damage. DO
NOT use the product if the cord has been damaged.
7. DO NOT use this air sanitizer on a power strip. It is not recommended to use an
extension cord.
8. ALWAYS UNPLUG the air sanitizer while it is being cleaned. Wait 10 seconds before
opening the panel.
9. DO NOT move or tilt the air sanitizer while it is in operation. Turn off and unplug
before moving.
10. DO NOT immerse the air sanitizer in water at any time because permanent damage
will occur. To properly clean your air sanitizer, follow the instructions in "Maintenance"
on page 6.
11. To reduce the risk of electric shock, this product has a polarized plug (one blade is
wider than the other) as a safety feature. This plug will fit into any polarized outlet only
one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat or override this safety feature.
12. This equipment should be inspected frequently and collected dirt removed from it
regularly to prevent excessive accumulation that could result in flashover.
©2012 Hunter Fan Company
I
3