Table of Contents
Advertisement
How to Add Coolant to the Coolant
Surge Tank
If you haven't found a problem yet, check to see if coolant
is visible in the surge tank. If coolant is visible but the
coolant level isn't at the proper level (below the base of
the filler neck), add a 50/50 mixture of clean, drinkable
R
-
water and DEX
COOL
coolant at the coolant surge tank,
but be sure the cooling system, including the coolant surge
tank pressure cap, is cool before you do it. See "Engine
Coolant" in the Index for more information.
If no coolant is visible in the surge tank, add coolant
as follows:
CAUTION:
Steam and scalding liquids from a hot cooling
system can blow out and burn you badly. They are
under pressure, and if you turn the coolant surge
--
tank pressure cap
even a little
out at high speed. Never turn the cap when the
cooling system, including the coolant surge tank
pressure cap, is hot. Wait for the cooling system
and coolant surge tank pressure cap to cool if you
ever have to turn the pressure cap.
--
they can come
5-15
Advertisement
Table of Contents
