Smeg DISHWASHER Instruction Manual page 5

After using the table to identify the most appropriate washing program:
•
press the ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
•
close the door; after about 2" the program will start. While it is in
progress, the relative LIGHT will flash (indicating that the program is
being executed).
PROGRAMME,
NUMBER & SYMBOL
SOAK
1
2
DELICATE
ECO (*)
3
EN 50242
4
NORMAL
5
INTENSIVE
Only run the soak program with half loads.
(*) Reference program as per EN 50242 standard.
(–) Not present.
(1) Average power consumption with the softener set on level 2.
(2) The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.
User instructions
LOAD CROCKERY
AND CUTLERY
Pans and dishes
awaiting
a further wash
Wash immediately
after use for dishes
with light dirt
Wash immediately
after use for dishes
with normal dirt
Dishes
with normal dirt
Very dirty pans and
dishes (except
delicate items)
DURATION
PROGRAM
PROGRESS
Cold prewash
Wash at 45°C
Cold rinse
Rinse at 68°C
Dry
Wash at 50°C
Cold rinse
Rinse at 65°C
Dry
Cold prewash
Wash at 65°C
Cold rinse
Rinse at 68°C
Dry
Prewash at 45°C
Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry
CONSUMPTION
MINUTES WATER
(2) LITRES (1)
9' 5
59' 12
125' 14
82' 17
105' 20
POWER
KWh (2)
_
0,90
0,95
1,25
1,50