Setting Up For Playback Of An Ntsc Disc - Sharp CD-G7500DVD Operation Manual

Setting up for playback of an NTSC disc

RRMCGA015AWSA
*CD-G7500DVD(EN)23-28 24
Used to specify the colour system in accordance with the TV connected when
playing back an NTSC disc.
1
Whilst a disc is stopped, press the SET UP button whilst
pressing down the SHIFT button to display the setup
screen.
2
Use the cursor L or M button to select the "
3
Press the ENTER button and
then use the cursor L or M
button to select "NTSC".
4
Press the ENTER button to display the setting selection.
5 Use the cursor L or M button to select "NTSC" or
"NTSC → → → → → PAL".
About the NTSC settings:
NTSC:
Select this setting when you have an NTSC TV or
an NTSC-compatible Multi-System TV connected
to the unit.
NTSC → → → → → PAL:
Select this setting when you have a PAL TV
connected to the unit. This setting converts the
NTSC signal to a modified PAL signal.
6
Press the ENTER button to confirm the setting.
To exit the setup screen and return to the startup screen, press the SET
UP button whilst pressing down the SHIFT button or the RETURN button.
Notes:
I When you playback the PAL discs, either setting of "NTSC → PAL" or "NTSC"
can be used on a PAL TV or a Multi-System TV.
I PAL signal can not be converted to NTSC signal.
I This setting disable during play operation.
05.1.13, 14:42
CD-G7500DVD (S)
TINSZA159AWZZ
CD-G7500DVD
CP-G7500
ENGLISH
TV MODE ".
T V M O D E 4:3 LB
N T S C N T S C P A L
SELECT
ENTER ENTER RETURN
E-24
7