Connecting A Pc; Using Digital Audio Output; Using Av Link Function - Sharp Aquos LC-65GD1E Operation Manual

Using external equipment

Connecting a PC

Use the INPUT5 terminals to connect a PC.
AVC System
(rear view)
DVI cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
NOTE
• The PC input terminals are DDC1/2B-compatible.
• Refer to page 71 for a list of PC signals compatible with
the System.
AVC System
(rear view)
RGB/DVI conversion cable
(commercially available)
ø 3.5 mm stereo minijack cable
(commercially available)
NOTE
• Macintosh adaptor may be required for use for some
Macintosh computers.
• When connecting to a PC, the correct input signal type is
automatically detected. (See page 64.) If the PC image
does not come in clearly, you may need to set the Auto
Sync. adjustment in the "Setup" menu. (See page 58.)

Using Digital Audio Output

It is possible to output audio through the DIGITAL
AUDIO OUTPUT terminal.
PCM audio outputs from the terminal.
To optical digital input of external audio devices
56
Connect the cable after
removing the terminal cover.
PC
PC
Optical fibre cable

Using AV Link function

This System incorporates four typical AV Link functions
for smooth connections between AVC System and
other audiovisual equipment.
NOTE
• Only works when the audiovisual equipment is connected
to the INPUT 2 terminal on the AVC System with AV Link
via a fully wired SCART.
One Touch Play
While the System is in standby mode, it automatically
turns on and plays back the image from the audiovisual
source (e.g. VCR, DVD).
System Standby
When the connected audiovisual equipment (e.g. VCR,
DVD) enters standby mode, so does the System.
WYSIWYR (What You See Is What You Record)
When the remote control unit of the connected VCR
has the WYSIWYR button, you can automatically start
recording by pressing the WYSIWYR button.
Preset Download
Automatically transfers the channel preset information
from the tuner on the System to the one on the
connected audiovisual equipment (e.g. VCR) via the
INPUT 2 terminal.
AVC System (rear view)
SCART cable
(commercially available)
NOTE
• Refer to operation manuals of each external equipment
for the details.
• The use of the AV-Link function is only possible if the TV-
set has enforced a complete auto-installation with the
connected audiovisual equipment (page 13, Initial auto
installation).
The availability of the AV-Link function depends on the
audiovisual equipment used. Depending on the
manufacturer and type of equipment used, it is possible
that the described functions may be completely or partially
unusable.
VCR