Starting Autoset Memory Preset; Tune Adjust; Stereo Indicator - Ford 2006 Expedition Owner's Manual

Starting autoset memory preset

1. Select a frequency band using the AM/FM select controls.
2. Press the AUTO control.
3. When the first six strong stations
are filled, the station stored in
memory preset control 1 will start
playing.
If there are less than six strong
stations available on the frequency
band, the remaining memory preset
controls will all store the last strong station available.
Any preset stored via the presets directly (pressing and holding) in this
mode are temporary.
A message will indicate whenever a temporary preset is stored or
recalled. This mode is active while the AUTO soft key is highlighted.
To deactivate autoset and return to your audio system's manually set
memory stations, press the AUTO control again.

Tune adjust

The tune feature works in radio
mode.
• Select the TUNE soft key.
• Press SEEK to go up
down the frequency band
manually.

Stereo indicator

Whenever a stereo signal is received in radio mode, the stereo indicator
(ST) will appear in the display.
2006 Expedition (exd)
Owners Guide (post-2002-fmt)
USA (fus)
Entertainment Systems
or
59