Yamaha GRIZZLY 125 Owner's Manual page 25

EBU00056
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
cC
See starting instructions prior to starting
engine (see page 6-1 for details).
NOTE:
If the starter switch is pushed with the main
switch "ON" and the engine stop switch "OFF",
the starter motor will be activated but the engine
will not start. To start the engine, be sure to
position the engine stop switch at "RUN".
EBU14770
Light switch "LIGHTS"
Set the switch to the "LO" position to turn on the
low beam and the taillight.
Set the switch to the "HI" position to turn on the
high beam and the taillight.
Set the switch to the "OFF" position to turn off all
of the lights.
cC
Do not use the headlights with the engine
turned off for an extended period of time,
otherwise the battery may discharge to the
point that the starter motor will not operate
properly. If this should happen, remove the
battery and recharge it.
4-3