Yamaha GRIZZLY 125 Owner's Manual page 107

2
1
1. Front cover
1. Front cover
3. Remove the V-belt air filter element cover
by removing the screw.
4. Pull out the air filter element.
2
2. Quick fastener (× 2)
1
2
2. Coupler
q
1. V-belt air filter element cover 2. Screw
3. Air filter element
5. Tap the air filter element lightly to remove
most of the dust and dirt. Blow out the
remaining dirt with compressed air. If the air
filter element is damaged, replace it.
NOTE:
Be sure the air filter element is seated properly
against the case.
6. Install the air filter element cover by
installing the screw.
7. Connect the coupler, and then install the
front cover by installing the quick fasteners.
8. Install the front carrier by installing the bolts.
8-15
w
e