Using The Multi Audio Function; Displaying Subtitles; Using The Mheg5 Application (Uk Only) - Sharp AQUOS LC-26D44E Operation Manual

Useful features (DTV)

Using the multi audio function

Change the audio mode and language for the currently
viewed service.
1
Press 2 when no other menu screen is
displayed.
Multi Audio
Audio Mode
S.No Language Code
1 Eng
2 Fre
3 Ger
4 Fin
Select
2
Press c/d to select the desired audio mode
(Left, Right, L+R, Stereo), and then press b to
move down.
3
Press a/b to select the desired language
available for the service, and then press OK.
NOTE
• Once you tune to another service or the power is turned
off, the setting returns to the parameter set in the
Language menu (page 23).

Displaying subtitles

Set the desired language for the subtitle display and
enable/disable the subtitle display.
1
Press [ when no other menu screen is
displayed.
Subtitle
Language
Subtitle
Select
2
Press a/b to select "Language", c/d to
select the desired language available in the
stream, and then press b.
3
Select "Subtitle", press c/d to select "On" or
"Off".
• A confirmation message displays.
4
Press c/d to select "Yes", and then press OK.
Stereo
Audio Type PID
MPEG2 1211
MPEG2 1212
MPEG2 1213
MPEG2 1214
DTV MENU OK END
English
On
DTV MENU OK END
NOTE
• When "Subtitle" is set to "On", the TV will automatically
start subtitle presentation if tuned to a programme
containing subtitle data.
• This function deactivates each time you turn off the TV.
• When you press [ while watching DTV broadcasts, the
message "No subtitle" may appear instead of the Subtitle
OSD screen as mentioned. (This happens depending on
the type of programme and happens even when the TV is
actually receiving the subtitle data.)
In this case, press m first to activate the teletext mode,
then press [.
User for LC-26D44E:
• Subtitle is set to off when the power is turned on.
User for LC-26D44S:
• Subtitle is set to on when the power is turned on.
Using the MHEG5 application (UK
only)
Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively.
When provided, the MHEG5 application will start when
you press m.
Sample MHEG5 screen
NOTE
• When "Subtitle" is set to "On", and the TV is tuned to a
service containing both MHEG5 and subtitle data, the
subtitle takes priority and subtitle presentation starts
automatically. In this case press m to start the MHEG5
presentation.
31