Timer And Sleep Operation (Remote Control Only) - Sharp XL-DH330PH Operation Manual

Timer and sleep operation (Remote control only)

Timer playback:
The unit turns on and plays the desired source (CD,
TUNER, USB, iPod, AUDIO IN) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY
TIMER.
Once timer:
Once timer play works for one time only at a preset time.
Daily timer:
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every
morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen a radio
programme, and use the daily timer to wake up.
1
Set the daily timer (pages 18 - 19).
2
Set the once timer (pages 18 - 19).
1 minute or more
Daily timer
Stop
Start
■ Timer playback
Before setting timer:
● Check that the clock is set to the correct time (refer to
page 6). If it is not set, you cannot use the timer
function.
● For timer playback: Plug in USB or load discs or dock
iPod to be played.
1
Press the ON/STAND-BY button to turn the power on.
2
Press and hold the CLOCK/TIMER button.
3
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button. Set the clock to the correct time if
"ONCE SET" or "DAILY SET" does not appear.
4
Within 10 seconds, press the
select "TIMER SET", and press the MEMORY button.
Once timer
Start Stop
or button to
or button to
E-18
5
To adjust the hour, press the
press the MEMORY button.
6
To adjust the minutes, press the
then press the MEMORY button.
7
Set the time to finish as in steps 5 and 6 above.
8
To select the timer playback source (CD, TUNER, USB,
iPod or AUDIO IN), press the
the MEMORY button.
When you select the tuner, select a station by pressing
the or button, and then press the MEMORY
button. If a station has not been programmed, "NO
PRESET" will be displayed and timer setting will be
cancelled.
9
Adjust the volume using the VOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
10
Press the ON/STAND-BY button to enter the power
stand-by mode. The "TIMER" indicator lights up and
the unit is ready for timer playback.
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The " " indicator will blink during timer
playback.
The "DAILY" indicator will blink during timer playback.
12
When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
Daily timer:
The timer operates at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel
the daily timer when it is not in use.
or button and then
or button and
or button. Press