Colour Standard; Sound Standard; Decoder; Overview Menu - Sharp Aquos LC-32WD1E Operation Manual

Menu operations (main)

Colour Standard

The Colour Standard setting selects the colour system to
receive. See "Specifications" on page 31 for a list of the
available colour systems.
NOTE:
• If AUTO is selected, the colour system is
automatically set. If an image does not display
clearly, select a different colour system.
• Depending on the input, not all colour systems are
available.

Sound Standard

The Sound Standard setting selects the sound system to
receive. See "Specifications" on page 31 for a list of the
available sound standards.
NOTE:
• Depending on the input, not all sound standards
are available.

Decoder

The Decoder setting informs the TV that you are using a
decoder as part of your audiovisual equipment. See
"Connecting a decoder" on page 10.

Overview Menu

The Overview Menu allows you to delete channels and
change the channel order.
1
Press to select the TV input source.
2
Press MENU. The TV Menu screen displays.
3
Press / to select Setup Menu, and then press OK.
4
Press / to select Overview, and then press OK.
If you have a PIN set in Child Lock, enter it now using
0–9. See page 17 for information.
The Overview Menu displays.
5
Press / / / to select the channel.
• To delete the channel, press RED. Press RED to
confirm.
• To change the channel order:
a. Press GREEN to select the channel.
b. Press
new position.
c. Press GREEN again to place the
channel in the new position.
TV only
/ / / to go to the desired

Child Lock

Menu Operation: C (page 12)
The Child Lock setting blocks children from accessing
specified channels and some on-screen display menus.
If you try to access blocked content when Child Lock is set
to "On", the PIN input menu displays. Entering the correct
PIN lifts the child lock temporarily until the TV enters
standby mode. Enter the PIN using 0–9.
• If you have already set this feature to "On", you
must enter your PIN to access this menu.
1
Press MENU. The TV Menu screen displays.
2
Press / to select the Setup menu, and then press
OK.
3
Press / to select Child Lock, and then press OK.
4
Press / to select Active, and then press
set the setting to on or off.
5
Press / to select PIN, and then enter a 4-digit PIN
using 0–9.
NOTE:
• This setting activates the Child Lock feature and
sets a PIN. To block a channel, you must specify
which channels to block. See page 16.
• This setting only applies to the analogue TV
channels and menus. To block DTV channels and
menus, see "Child Lock" on page 25.
• See page 29 for information on resetting the PIN
to the factory preset "1234".
• To change the PIN, enter a new PIN in this menu.
To activate the PIN, select Active, and change
the setting to "Off" and then "On" again.

Fine Sync

Menu Operation: C (page 12)
The Fine Sync setting allows you to manually adjust the
image on the TV.
V-Pos. Moves the image up or down.
H-Pos. Moves the image left or right.
Clock Adjusts the screen if the image flickers
with vertical stripes.
Phase Automatically adjusts the screen if text
has low contrast or if the image
flickers.
Reset Resets the settings to the factory
default.
NOTE:
• Similar adjustments are available on your
computer.
TV only
/ to
PC only
17