Source Labels; Assign A Channel Decoder (For Atv); Check Your Current Software Version; Update Software (Digital Broadcasts) - Sharp LC-26SB25E Operation Manual

tV menu

Source labels

You can assign a label to each input source as you
prefer in the label list�
1�
Go to installation > Source labels
2�
Assign a input source and press > to select a
label from label list.
3�
Press b on the remote control and check the
result.

assign a channel decoder (For atV)

Decoders that decode channels can be connected to
SCART� You have to assign the TV channel as a channel
to be decoded� Then assign the connection where the
decoder is connected�
1�
Press MENU on the remote control and select
installation > Decoder.
TV Menu
Installation
Language
Country
Channel installation
Source labels
Decoder
Current software info

AV reset

Factory reset

2�
Press ≥ to enter the list.
3�
Press < or > to select the channel to decode.
4�
Press oK to select or unselect the channel.
5�
Press ≤ to return to the previous menu.
6�
Press menu to exit.

Check your current software version

Press menu on the remote control and select
installation > Current software info.

update software (digital broadcasts)

If using (DVB-T) digital broadcasts, your TV automatically
receives software updates� If you receive a message
on-screen prompting you to update your software:
Decoder
1 ...
2 ...
3 ...
• Select accept (recommended) to update the
software immediately.
reject to exit the update (not
• Select
recommended).
• remind me later to be reminded to update
Select
the software later.
note
• To scan all carriers for upgrade availability, perform the manual
upgrade�
• The software upgrade may take about 30 minutes, but may
take longer (up to 1 hour) depending on the signal status�
Caution
Do not disconnect the AC cord when the software
upgrade is in progress, as this may cause the upgrade
to fail. If problem arises ask a qualified service
personnel before the software upgrade period expires.
aV reset
To reset the Audio and Video to default settings�
1�
Press MENU on the remote control and select
installation > aV reset
2�
Press ≥ to select "Start now" and press oK.
3�
Press menu to exit.
Factory reset
When you activate the Factory reset , the TV needs to
be reset from First time installation�
1�
Press MENU on the remote control and select
installation > Factory reset
2�
Press ≥ to select "Start now" and press oK.
3�
Press menu to exit.
25