Bundling The Cables - Sharp Aquos LC-20AD5E Operation Manual

Quick guide
Removing the terminal cover
Pull down the hooks to open the cover.
LC-26AD5E, LC-26AD5S
LC-32AD5E, LC-32AD5S
Place the TV close to the AC
outlet, and keep the power
plug within reach.
(For Europe,
except U.K.
and Eire)
AC cord

Bundling the cables

LC-26AD5E, LC-26AD5S
LC-32AD5E, LC-32AD5S
Setting the TV on the wall
• This TV should be mounted on the wall only with the wall mount bracket available from SHARP. (See page 33.)
The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.
• When you use the AN-26AG (SHARP) for LC-26AD5E/LC-26AD5S or AN-37AG2 (SHARP) for LC-32AD5E/LC-
32AD5S wall mount bracket, set the angle of the TV up to 20°.
• Installing the LCD Colour TV requires special skill that should only be performed by qualified service personnel.
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting
or mounting that results in accident or injury.
• You can ask a qualified service p ersonnel about using an optional bracket to mount the TV to the wall.
-4
GB
LC-26AD5E, LC-26AD5S
LC-32AD5E, LC-32AD5S
(For U.K.
and Eire)
LC-20AD5E, LC-20AD5S
Cable clamp
LC-20AD5E, LC-20AD5S
Standard DIN45325 plug
(IEC 169-2)
75-ohm coaxial cable
LC-20AD5E, LC-20AD5S
Antenna
Connect the antenna cable
from your antenna-/cable
socket or the (room-/roof)
antenna for antenna input
terminal on the back of your
TV set to receive digitally/
terrestrially broadcast
stations.
An indoor antenna can also
be used under good reception
conditions.
Cable clamp
This cable clamp is already
attached to the housing of the
LC-20AD5E and LC-20AD5S
models.