Door Reversal Instructions - Tricity Bendix FD 852 Operating And Installation Instructions

Table of Contents

Advertisement

DOOR REVERSAL INSTRUCTIONS

Before carrying out the operations described below,
Fig. 5
pull out the mains plug from the wall socket.
To carry out door reversal operate as follows:
3
Remove the plastic cover (6) (which has a clip-in fit-
ting) masking the bottom hinge;
Remove bottom hinge (1);
Slide out the lower door from middle hinge (2) and re-
move the latter;
Slide out the upper door from pin (3), unscrew the lat-
ter and then screw it down into the hinge provided on
the opposite side;
2
Refit the upper door and the middle hinge on the op-
5
posite side;
Refit the lower door and bottom hinge (1) on the op-
posite side, after having removed the plugs (7) and
4
screws; these must then be refitted in the holes on the
opposite side;
1
Refit the plastic cover (6) on the bottom hinge.
Remove handles (4-5) and refit them on the opposite
side.
The holes that are not used are to be masked with the
7
6
plastic plugs removed.
D074
Warning:
After having reversed the opening direction of the
doors, check that all the screws are properly tight-
ened.
7

Advertisement

Table of Contents
loading

Table of Contents