Table of Contents
Advertisement
Timer and sleep operation (continued)
XL-UR5H
ENGLISH
14
To select a preset channel number, press the PRESET (
or
) button and then press the CLOCK/TIMER button.
15
Press the SLEEP button for more than 2 seconds to
activate timer function.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
16
Press the ON/STAND-BY button to enter the power stand-
by mode.
17
When the preset time is reached, playback will start at the
selected playback source.
The volume will increase gradually until it reaches the preset
volume at 16.
18
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
To cancel Timer function:
Whilst in power ON mode, press the "SLEEP" button for 2 seconds.
The "TIMER" indicator will disappear.
Notes:
After selecting the playback source, when press the CLOCK/
TIMER button to confirm, it will then return to current playback
setting.
When the preset time is reached, playback will start at current set-
ting if no selected playback source is made.
The volume cannot be preset during timer operation. It will always
go to volume 16.
E-37
Sleep operation
The radio, compact disc and USB/SD can all be turned off
automatically.
1
Play back the desired sound source.
2
Press the SLEEP button repeatedly to select the time.
(Maximum: 90 minutes - Minimum: 10 minutes)
3
Release the SLEEP button.
"SLEEP" will appear.
4
The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
To confirm the remaining sleep time:
1 Whilst "SLEEP" is indicated, press the SLEEP button.
The remaining sleep time is displayed for about 10 seconds.
You can change the remaining sleep time whilst it is displayed by
pressing the SLEEP button (steps 2 - 3).
To cancel the sleep operation:
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1 Whilst "SLEEP" is indicated, press the SLEEP button to select 0
minute.
MHz
SLEEP
Advertisement
Table of Contents
