Table of Contents
Advertisement
Using the Radio Data System (RDS) (continued)
XL-UR5H
ENGLISH
To recall stations in memory
To specify programmed types and select stations (PTY search):
You can search a station by specifying the programme type (news,
sports, traffic programme, etc. ... see pages 34 - 35) from the stations
in memory.
1
Press the TUNER (BAND) button to select the FM.
2
Press the RDS (ASPM/PTY) button on the remote control.
"SEL PTY" (blinking) will appear for about 6 seconds.
3
Within 6 seconds, press the PRESET (
select the PTY code.
Each time the button is pressed, the PTY code will appear. If the
button is held down for more than 0.5 seconds, the PTY code
will appear continuously.
4
Whilst the selected PTY code is displayed (within 6
seconds), press the RDS (ASPM/PTY) button again.
The unit searches the 20 preset stations and stops when it finds
a station of the selected category then tunes into the station. The
RDS indicator lights up.
If no programme is found in the 20 preset stations, "NO PTY"
appear on the display and returns to the previous station.
E-33
Notes:
If the display has stopped flashing, start again from step 2. If the
unit finds a desired programme type, the corresponding channel
number will lit for about 4 seconds, and then the station name will
remain lit.
If you want to listen to the same programme type of another
station, press the RDS (ASPM/PTY) button and start again from
step 3. The unit will look for the next station.
To specify station names and select stations manually:
You can select a station by specifying the name (BBC R1, BBC R2,
etc.) from the stations stored in memory.
Before starting this operation, you must store one or more station
names in memory.
1 Press the TUNER (BAND) button to select the FM band.
or
) button to
2 Press the PRESET (
select a desired station.
3 The station name will be displayed for 6 seconds. Then the
display will change.
RDS
MHz
or
) button on the remote control to
Advertisement
Table of Contents
