Advertisement
Operation Specification
- Slide the On/O switch to the "On" pos on, the Blue LED wil ash. When the
Green LED is on, the unit is in Bluetooth Pairing Mode.
-Slide the On/O switch to the "O " posi on, all the LED status lights will shut o .
-The unit will automa cally go into "Pairing Mode" when it is turned on.
- Go into your devices se ngs menu and look for "
-If prompted for a password enter:
A er the unit has paired, and connected it will connect automa cally
when PA100B is turned on and the device is in range.
-If no device is found a er 25 sec. the PA100B will automa cally enter
pairing mode.
- Press "
- Press "+" to play the next track
- Press " -" to play previous track
- Press and Hold either "+/-" for volume
Plug in the supplied 3.5 mm cable into the PA100B. The other end is connected
to the device.
*Please note that only "Volume +/-" will fun on on the unit. Track control does
not fun on when in Aux-In mode.
-
ach the USB cable to the PA100B, and plug in to any USB charger. If the unit
is completely discharged, it take approximately 2.5 hours to fully charge the unit.
Red LED: On- Charging/ O – Charging complete
Green LED: On-BT Mode
Blue LED: Flashing-Pairing Mode/ Slow Flash-Connected
" to start playing music
"
Advertisement
