Playing Audio Via Aux - iHome iDM12 Instruction Manual

Playing Audio via Aux

1. Move the Bluetooth/Aux switch to the Aux position to listen to audio
via aux in.
2.Connect the micro USB plug to the micro USB charging port on the
back of the unit and connect the 3.5 mm audio plug to the
headphone or line-out jack on your audio device.
3.Press and hold the Power Button to turn on the unit (release when
green light appears).
4.Use the Volume +/- Buttons to adjust volume. You may wish to adjust
the volume on your audio device, too.
5.When done listening, press the Power Button to turn the unit off.
Remember to turn off your audio device, too.
iDM12
Using the
6