Concerning The Ir Repeater Function - Panasonic GP-VD130E Operating Instructions Manual

Concerning the IR repeater function

The IR repeater function enables operations to be performed in response to the signals from the remote controller which are
received by the receivers of the camera (this unit) in cases where the camera and HD Visual Communication Unit have been
installed at a distance from each other. Purchase an IR system cable separately if this function is to be used.
q Regular remote control operations
p
The signals of the remote controller are received directly by the receiver of the HD Visual Communication Unit, and the
operations corresponding to the signals are performed. (The receivers of the camera are not used in cases like this.)
This unit
q Remote control operations using the IR repeater function
p
The signals of the remote controller are received by the receivers of the camera (this unit), and the operations of the HD Visual
Communication Unit, etc. are performed via the IR system cable.
This unit
Remote controller
signal receiver
p p For details on how to connect the IR system cable (sold separately) and check the operations after the units have been
installed, refer to pages 15 and 16.
12
HD Visual Communication Unit
HD Visual Communication Unit
IR system cable
The HD Visual Communication Unit must be
installed in such a way that it cannot receive the
signals of the remote controller directly.
HD Visual Communication Unit operations
Camera operations
Remote control signal receiver
p p The figure does not show the HDMI cable.
HD Visual Communication Unit operations
Camera operations
Remote control signal receiver
p p The figure does not show the HDMI cable.