Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for APELL APS61E
Summary of Contents for APELL APS61E
- Page 1 APS61E Dryer Secadora Asciugatrice...
- Page 2 Read this manual prior to initial operation of the product! Dear Customer, We hope that your product, which has been manufactured in modern facilities and passed through a strict quality control procedure, will give you very good results. We advise you to read through this manual carefully before using your product and keep it for future reference.
-
Page 3: Important Safety Information
Important safety information This section includes safety information that • Items cleaned or washed with gasoil/fuel oil, will help protection from risks of personal dry-laundry solvents and other combustible injuries or materialistic damages. Failure or explosive materials as well as the items to follow these instructions shall cause that are contaminated or spotted with such any warranty and reliability commitment to... -
Page 4: Intended Use
• Do not reach into the machine when the disorders or unlearned or inexperienced drum is spinning. people (including children) unless they • Unplug the machine when it is not in use. are attended by a person who will be •... -
Page 5: Appropriate Installation Location
Installation Refer to the nearest Authorised Service Agent washing machine. The bracket (Part no. for installation of your product. 296 280 0100 white/296 280 0200 grey) Preparation of location and electrical must be installed by the Authorised Service installation for the product is under Agent. -
Page 6: Adjusting Feet
maximum 80 cm. • Make sure that the hose is not pinched or bend. • The end of the hose should not be bent, it should not be stepped on and it must not be folded between the drain and the product. -
Page 7: Electrical Connection
make sure that its location and power supply installations are appropriate. If they are not, call a qualified electrician to have any necessary arrangements carried out. • Make sure that the power connections of the product are in accordance with the instructions given in relevant chapters of this manual. -
Page 8: Initial Preparations For Drying
Initial preparations for drying Things to be done for energy saving: A B C • Make sure that you operate the product at its full capacity but pay attention to not exceeding it. • Spin your laundry at the highest speed possible when washing them. -
Page 9: Preparing Laundry For Drying
• Do not dry items cleaned with industrial "Programme Selection Table". Always chemicals in the dryer. start the programme in accordance with • Do not dry your unwashed laundry in the the maximum load capacity. dryer. C Adding laundry to the machine more •... -
Page 10: Control Panel
Selecting a Program and Operating Your Machine Control panel . Filter cleaning warning light . Start/Pause/Cancel button Warning light turns on when the filter is full. Used to start, pause or cancel the . Program follow-up indicator programme. Used to follow-up the progress of the . -
Page 11: Preparing The Machine
Preparing the machine You must press the “Low temperature” 1. Plug in your machine. button for synthetics 2. Place the laundry in the machine. 3. Press the “On/Off” button. Pressing the “On/Off” button does not necessarily mean that the programme has started. - Page 12 Program selection and consumption table Program table Approximate Spin speed in washing amount of Drying time Programs Capacity (kg) machine (rpm) remaining (minutes) humidity Cottons / Coloreds 1200-1000 % 60 900-800 % 70 Ready to Wear 1200-1000 % 60 80-60 900-800 % 70 110-80...
-
Page 13: Warning Indicators
Auxiliary function is moved and another program mode is selected while the machine is operating. Low temperature You must cancel the ongoing program in This function allows for drying at lower order to change the drying program. (See, temperatures and therefore saves energy. Ending the program through canceling) Warning LED will light up when you select the Adding/removing laundry in standby... -
Page 14: Ending The Program Through Canceling
Ending the program through cycle. Press the “On/Off” button to shut down the canceling machine. The program which is selected first will keep A 2-hour anti creasing program to prevent on going even if the position of the program laundry from creasing will be activated if selection button is changed. -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Cover filter similar substances when cleaning since these materials can cause fire and explosion! Lint and fibres released from the laundry to the air during the drying cycle are collected in the Water tank (Products equipped with a “Cover Filter”. - Page 16 and wait until the water drains. 5. Replace the condenser with the side of it labelled with “Top” facing upwards. Lock the 4 condenser locks. Make sure that the red lock on the upper right corner is engaged securely. 6. Close the kick plate cover. Close properly and check the locking latchs?
-
Page 17: Solution Suggestions For Problems
Solution suggestions for problems Problem Cause Explanation / Suggestion Drying process Cover filter and filter drawer might * Meshes of the filter may be clogged. takes too much have not been cleaned. Wash with water. time. * Cover filter and filter drawer might Laundry come out * Meshes of the filter may be clogged. - Page 20 DRYER BUILT UNDER KIT ASSEMBLY INSTRUCTIONS 1) Remove 3 screw ( A ) and Pull out the top plate. 2) Remove the 4 support bracket (If exist) ( B ) by unscrewing the screws shown in the figure. 3) Unscrew the 2 screws ( C ) located on the back top corners of the dryer and the 3 screws ( D ) which fixed front panel.
Need help?
Do you have a question about the APS61E and is the answer not in the manual?
Questions and answers