Using The Oven - Smeg Microwave Instructions For Use Manual

7

USING THE OVEN

7.1 Precautions and General Advice
When the oven and grill are used for the first time, they should be heated
to the maximum temperature for long enough to burn off any oily residues
left by the manufacturing process, which might contaminate foods with
unpleasant smells.
Oven accessories which may come into contact with foods are made from
materials compliant with directive 89/109/EEC of 21/12/88 and national
relevant regulations.
To prevent excessive amounts of condensation from forming on the
internal glass, food should not be left inside the oven for too long after
cooking.
7.2 Operating settings
This product is programmed to provide 3 operating settings, which can
be\modified by pressing PT2.
Standby setting: activated as soon as the current time has been
confirmed, with DSP1 on and showing the current time.
ON setting: from the standby setting, press PT2 once. All the displays and
knobs light up.
OFF setting: from the ON setting, press PT2 once.
Only the symbol
The heating system is not activated immediately in any of these functions, in
order to improve operator safety.
7.3 First Use
At first use, or after a power failure, the oven's left hand-display, DSP1, will
show a flashing
time must be set.
7.3.1 Setting the current time
Press PT 1 for 3 seconds to set the current time, turn PT1 to the right and
left to increase or decrease the hours. Press it once to move on to setting
the minutes. Turn it the right and left to increase or decrease the hours
and press it to set the current time. The symbol
display, which will stop flashing. Press PT1 again and the minutes will
Flash, turn right left to set the minutes. Press PT and the time is set.
7.3.2 Setting the current time
It might become necessary to change the current time, for example at the
switch from summer to winter time. To do this, start from the standby
setting (see point "7.2 Operating settings"). Now repeat the operations
described in point "7.3.1 Setting the current time".
11
Instructions for the User
on DSP1 remains on.
symbol. To start any cooking operation, the current
will appear on the