Advertisement
Quick Links
Advertisement
Related Manuals for Smeg MTK60X34
Summary of Contents for Smeg MTK60X34
- Page 1 MTK60X34...
- Page 2 PART IDENTIFICATION SHEET...
- Page 4 60cm TRIM KIT – CABINET...
- Page 5 INSTALLATION PROCEDURE - 1 PLACE THE TEMPLATE (no.8) ON THE LEFT SIDE OF THE CABINET PAYING ATTENTION TO ITS POSITIONING AND LOCK IT WITH ADHESIVE TAPE. THE FRONT WALL OF THE TEMPLATE (A) MUST BE IN LINE WITH THE FRONT OF THE CABINET THE HOLE OF THE TEMPLATE (B) MUST BE POSITIONED OUTWARDS...
- Page 6 INSTALLATION PROCEDURE - 2 PLACE THE HOLDER-KIT (no.2) IN ITS SEAT AND FIX IT WITH 2 SCREWS (no.3) (to facilitate the assembly of the screw perform hole diameter 1 mm with drill) REPEAT THE OPERATION FOR THE UPPER HOLDER-KIT AND AFTER REMOVE THE TEMPLATE...
- Page 7 INSTALLATION PROCEDURE - 3 REPEAT THE OPERATION ON THE RIGHT SIDE AND BLOCK THE 2 HOLDER-KIT ON THE CABINET (PLACE THE TEMPLATE, PLACE THE HOLDER-KIT, FIX IT WITH 2 SCREW,REMOVE THE TEMPLATE)
- Page 8 INSTALLATION PROCEDURE - 4 A – DRAW THE HORIZONTAL CENTER OF THE CABINET B – PLACE THE RIGHT BASE (no.5) ON THE CABINET BY MATCHING THE LITTLE CUT WITHTHE HORIZONTAL CENTER OF THE CABINET AND SECURE IT WITH 3 SCREWS (no.6) IN THIS PHASE NOT INSERT THE SCREW IN THE HOLE HIGHLIGHTED...
- Page 9 INSTALLATION PROCEDURE - 5 PLACE THE LEFT BASE (no.4) ON THE CABINET BY MATCHING THE CUTS (RIGHT BASE AND LEFT BASE) AND SECURE IT WITH 4 SCREWS (no.6) IN THIS PHASE NOT INSERT THE SCREW IN THE HOLE HIGHLIGHTED...
- Page 10 INSTALLATION PROCEDURE - 6 REMOVE FROM OVEN ALL INTERNAL ACCESSORIES PLACE THE OVEN ON ITS SIDE AND PERFORM THE PRE- ASSEMBLY OF THE FRONT BRACKET (no.7) IN THE BOTTOM PART OF THE OVEN WITH 2 SCREWS (no.6) FOR A CORRECT ASSEMBLY MAINTAINING THE REFERENCE HOLE (HIGHLIGHTED IN THE PICTURE) ON THE RIGHT...
- Page 11 INSTALLATION PROCEDURE - 7 ROTATE THE MICROWAVE AND PLACE IT ON THE BASE-KIT (no.4 + no.5) THE HOLES OF THE FRONT BRACKET (no.7) MUST BE CORRISPOND WITH THE HOLES PRESENT ON THE BASE-KIT (no.4 + no.5).
- Page 12 INSTALLATION PROCEDURE - 8 OPEN THE DOOR OF THE MICROWAVE AND FIX IT WITH 2 SCREWS (no.6) IN THE FRONT AREA. PLACE THE ACCESSORIES IN THE OVEN...
- Page 13 INSTALLATION PROCEDURE - 9 FIX THE BODY-KIT TO THE CABINET...