Resetting The Adjustments; Technical Features; Power Saving Function - Sony GDM-FW9011 Operating Instructions Manual

Resetting the adjustments

This monitor has the following three reset methods. Use the
RESET button to reset the adjustments.
RESET
x x x x Resetting a single adjustment item
Use the joystick to select the adjustment item you want to reset,
and press the RESET button.
x x x x Resetting all of the adjustment data for the
current input signal
Press the RESET button when no menu is displayed on the screen.
Note that the following items are not reset by this method:
• on-screen menu language (page 8)
• adjustment mode in the COLOR menu (EASY, EXPERT,
sRGB) (page 11)
• on-screen menu position (page 14)
• control lock (page 14)
x x x x Resetting all of the adjustment data for all
input signals
Press and hold the RESET button for more than 2 seconds.
Note
The RESET button does not function when
set to ON.

Technical Features

Power saving function

This monitor meets the power-saving guidelines set by VESA,
E
NERGY
computer or video graphics board that is DPMS (Display Power
Management Signaling) compliant, the monitor will automatically
reduce power consumption in three stages as shown below.
Power mode Power
normal
operation
1 standby
2 suspend
(sleep)**
3 active off***
(deep sleep)**
power off
*
** "Sleep" and "deep sleep" are power saving modes defined by the
*** When your computer enters power saving mode, the input signal is
(CONTROL LOCK) is
S
TAR, and NUTEK. If the monitor is connected to a
consumption*
170 W
15 W
15 W
1 W
0 W
Figures reflect power consumption when no USB compatible
peripherals are connected to the monitor.
Environmental Protection Agency.
cut and NO INPUT SIGNAL appears on the screen before the
monitor enters active off mode. After a few seconds, the monitor
enters power saving mode.
! (power)
indicator
green
green and orange
alternate
green and orange
alternate
orange
off
GB
15