Siemens washing machine Instruction Manual page 6

Removing the transportation protection
devices
Before the machine is used for the first time, all transportation protection devices
from the back of the appliance must be removed and stored for any later transport
(i.e., relocation)!
1 Remove the machine from the transport
base. Remove wedge
2 Remove the 4 screws
(Figure 2.1 ).
3 Remove transportation protection devices
C: Both bolts are for this purpose
(Figure 2.2 ) remove with a 10 mm or 13
mm spanner (depending upon model).
Figure 1
A
( Figure 1 ).
with a screwdriver
Check to see that both plastic inserts on
the connecting carrier have also been
removed.
Refasten the screws
locations.
4 Both holes must be covered with the
caps provided
package) ( Figure 2.3 )!
Figure 2.1
Figure 2.2
13
Figure 2.3
6
at their original
(found in the accessories
2
1
2
1