WPS
Wi-Fi Protected Setup (WPS) is the simplest way to establish a connection
between the wireless clients and the wireless router. You don't have to select
the encryption mode and fill in a long encryption passphrase every time when
you try to setup a wireless connection. You only need to press a button on both
wireless client and wireless router, and WPS will do the rest for you.
The wireless router supports two types of WPS: WPS via Push Button and WPS
via PIN code. If you want to use the Push Button, you have to push a specific
button on the wireless client or in the utility of the wireless client to start the
WPS mode, and switch the wireless router to WPS mode. You can simply push
the WPS button of the wireless router, or click the 'Start to Process' button in
the web configuration interface. If you want to use the PIN code, you have to
know the PIN code of the wireless client and switch it to WPS mode, then fill-in
the PIN code of the wireless client through the web configuration interface of
the wireless router.
WPS Check the box to enable WPS function and uncheck it to disable the WPS
function.
33
Need help?
Do you have a question about the WL-366 and is the answer not in the manual?