Operating Sequence; Washing 5 Kg Of White Cotton At 90°C; Load The Laundry; Measure Out The Detergent And The Fabric Softener - Tricity Bendix AW 1460 W Operating & Installation Instructions Manual

35.293.025....AW1460.qxd

Operating Sequence

Before the first wash, we recommend that you pour 2
litres of water into the main wash compartment
the detergent drawer in order to activate the ECO valve.
Then run a cotton cycle at 90°C, without any laundry in
the machine, to remove any manufacturing residue from
the drum and tub.
Pour 1/2 a measure of detergent into the dispenser
drawer and start the machine.
WASHING 5 KG OF WHITE COTTON AT 90°C
Suppose you have 5 kg of heavy soiled laundry to wash.
It is white cotton and is suitable for high temperature
washing.

1. Load the laundry

Open the door by carefully pulling the door handle
outwards.
Place the laundry in the drum, one item at a time,
shaking them out as much as possible. Close the door.
2. Measure out the detergent
and the fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required, pour it
into the main wash compartment
carry out the prewash phase, pour it into the
compartment marked
"prewash" option.
If required, pour fabric softener into the compartment
marked (the amount used must not exceed the
"MAX" mark in the drawer). Close the drawer gently.
28/2/06 20:20 Página 8
and, if you wish to
if you have selected the

3. Select the required programme

of
Turn the programme selector dial to the programme 1.
The light Start/Pause starts to flash. The pilot lights
corresponding to the various phases making up the
programme come on.
4. Select "SPIN REDUCTION" or
"NO SPIN" option.
Press the option button repeatedly, to select the desired
option. The relevant light illuminates

5. Select the required option

Select "prewash" or "rinse hold" option if required, the
corresponding light illuminates.
8