Accessories - Siemens M56 User Manual

§Menu§
KmK
Select function.
K
User Group
Depending on the service provider,
you can create groups with this ser-
vice. These can have access to inter-
nal (company) information, for
example, or special tariffs apply. The
details can be clarified with your ser-
vice provider.
Active
Activate/deactivate function. "User
group" must be deactivated for nor-
mal phone use (phone code, p. 21).
Select Group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outgo. Access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
Preferred Grp
If activated, only calls within this
standard user group can be made
(depending on the network configu-
ration).
m Setup
Network

Accessories

§Menu§
KmK
K
L
Car Kit
Only in combination with an original
Siemens handsfree Car Kit (p. 128).
The profile is activated automatically
as soon as the phone is inserted into
the cradle.
Auto Answer
(Factory default: off)
Calls are accepted automatically
after a few seconds. Eavesdropping
is possible!
±
Auto Off
(Factory default: 2 hours)
The phone is powered by the car's
power supply. You can adjust the
time between switching off the igni-
tion and the automatic switching off
of the phone.
Car Loudspk.
Select a different audio setting if
necessary for your Car Kit.
Accessories
Select function.
Shown on the display.
85