Makita 6339D Instruction Manual
Hide thumbs
Also See for 6339D:
- Instruction manual (57 pages) ,
- Instruction manual (49 pages) ,
- Instruction manual (49 pages)
Related Manuals for Makita 6339D
Summary of Contents for Makita 6339D
- Page 1 Cordless Driver Drill MODEL 6319D MODEL 6339D MODEL 6349D 005768 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
These values have been obtained according to EN50260. Responsible manufacturer: For Model 6349D Makita Corporation Anjo Aichi Japan For European countries only Noise and Vibration The typical A-weighted sound pressure level is 71 dB (A). The noise level under working may exceed 85 dB (A). -
Page 3: General Safety Rules
GENERAL SAFETY RULES GEA001-1 WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. The term “power tool” in all of the warnings listed below refers to your mains- operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 Remove any adjusting key or wrench sures reduce the risk of starting the power before turning the power tool on. A wrench tool accidentally. or a key left attached to a rotating part of the Store idle power tools out of the reach of power tool may result in personal injury.
- Page 5 ADDITIONAL SAFETY RULES FOR POWER TOOL GEB001-1 DO NOT let comfort or familiarity with product (gained from repeated use) replace strict adherence to drill safety rules. If you use this power tool unsafely or incorrectly, you can suffer serious personal injury. Use auxiliary handles supplied with the Hold the tool firmly.
- Page 6 Do not short the battery cartridge: A battery short can cause a large current flow, overheating, possible burns and even a break- (1) Do not touch the terminals with any con- down. ductive material. Do not store the tool and battery cartridge in (2) Avoid storing battery cartridge in a con- locations where the temperature may reach or tainer with other metal objects such as...
-
Page 7: Functional Description
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 005769 • Always switch off the tool before insertion or removal of the battery cartridge. - Page 8 Speed change 005772 This tool has a three-gear speed change lever. To change the speed, first switch off the tool and then slide the speed change lever to the “1” position for low speed, “2” position for medium speed or “3” position for high speed. Be sure that the speed change lever is set to the correct position before operation.
- Page 9 ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing side grip (auxiliary handle) 005775 Always use the side grip to ensure operating safety. Insert the side grip so that the protrusions on the grip base fit in between the grooves on the tool barrel.
-
Page 10: Operation
OPERATION Screwdriving operation 005778 First, slide the action mode change lever to the position of symbol and select the fastening torque. Place the point of the driver bit in the screw head and apply pressure to the tool. Start the tool slowly and then increase the speed gradually. Release the switch trigger as soon as the clutch cuts in. -
Page 11: Maintenance
CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 12 Makita Corporation Anjo, Aichi, Japan 884559A229...