Using The Navigation System; Navigation Control Buttons; Updating The Gracenote Database - Cadillac 2013 CTS Owner's Manual

1. Turn the ignition on.
2. Press to turn the system on.
3. Insert the update disc part way
into the slot, label side up. The
player pulls it in.
4. Update Confirmation screen
displays along with the version
information. Press the Update
screen button.
5. The system reboots and starts
updating the database.
A progress bar displays.
6. The disc automatically ejects
after the update is completed.
The system reboots.
This section presents basic
information needed to operate the
navigation system.
Use the navigation control buttons
located on the infotainment system
along with the available
touch-screen buttons on the
navigation screen to operate the
system. See
more information.
Once the vehicle is moving, various
functions are disabled to reduce
driver distractions.
The following control buttons are
located on the navigation system:
1. Press to turn the system on
and off.
2. Turn this knob to increase or
decrease the volume. The
volume works for the features
that are currently being used;
audio, OnStar
changes the volume for the
phone, voice guidance, and
speech recognition changes the
volume of voice prompts.
Press to make the screen
go up and down. In the up position,
all touch-screen buttons can be
viewed or used. In the down
for
position, a portion of the screen will
be shown that displays the current
audio source and temperature.
The dimming change button on the
navigation faceplate is used to
toggle between these dimming
modes.
your vehicle's current position on
the map screen. Each press of this
key cycles through Full Map and the
tab that displays the current audio
®
(if equipped)
Press to view