Troubleshooting - Transcend MP330 User Manual

If a problem occurs with your MP330, please first check the information listed below before taking your MP330
for repair. If you are unable to remedy a problem from the following hints, please consult your dealer, service
center, or local Transcend branch office. We also have FAQ and Support services on our website.
Operating system cannot detect the MP330
Check the following:

Is your MP330 properly connected to the USB port? If not, unplug it and plug it in again.

Is your MP330 connected to the Mac keyboard? If so, unplug it and plug it into an available USB port
on your Mac computer.

Is the USB port enabled? If not, refer to the user‟s manual of your computer (or motherboard) to
enable it.
The MP330 will not Power ON
Check the following:

Is the MP330 connected to your computer? If so, unplug it.

Is the

Is the battery out of power? If so, please recharge the player.
Cannot transfer files to the MP330
Unplug the MP330 from your computer, wait a moment, and plug it back in. If this does not work, use a paperclip
or pencil tip to hold down the "Reset" button for 3 to 5 seconds.
Buttons aren't working
Is the Hold switch enabled (
Cannot hearaudio playback

Have you transferred any music files to the MP330? If not, then you must first do so. (Only Mpeg I
Layer 3 and WMA files compressed at a rate of 32Kbps–320Kbps, WAV, and FLAC files are
supported.)

Are the earphones properly connected to the earphones jack? If not, reconnect them.

Is the volume loud enough? If not, increase the volume level until the music can be heard.
Song/album/artist name is not displayed correctly on the screen

The default language of the MP330 is English. Please change the player‟s Language setting to the
appropriate language for the content you are trying to display. EX: if your player's language is set
to English and you want to display Japanese characters, you must first select "Japanese" in
the Settings / Language menu to display the Japanese text correctly.

ID3 tag information has display priority on the screen of the MP330. You can modify the ID3 tag by
using Windows Media Player or Winamp.

If the ID3 tag is empty, just the file name will be displayed on the screen.
Troubleshooting︱
switch engaged? (
)? If so, set it to the off position (
).If it is, switch it to the off position (
33
).
).