Connection And Preparation; Power Supply; Connecting To A Computer - Grundig MPaxx 910 Manual

6

CONNECTION AND PREPARATION

Power supply

The player operates with the integrated lithium-polymer battery 1 x 3.7 V,
150 mA.
Charging the battery
Charge the battery for the player on a computer.
You can also charge the battery by connecting it to a USB-compatible hi-fi sy-
stem using a USB cable.
Note:
When charging with a standard USB adapter, the player is still ready for
operation. Press »
1 Connect the USB socket on the player to the USB socket on the computer or
hi-fi system using the USB cable or plug the charger lead into the USB socket
of the player.
2 Switch on the computer or hi-fi or connect the charger to the power supply.
– The LED on the player flashes during the charging procedure. The charging
time is approximately four hours. When the battery is fully charged, the
LED lights up constantly.
Note:
The playing time is more than 15 hours when the player is fully charged.
Note:
There is a risk of explosion if the battery is not replaced properly. Only use
the same type of battery or an equivalent.

Connecting to a computer

1
Switch on the computer.
2 Switch off the player.
3 Connect the USB socket on the player to the USB socket on the computer
using the USB cable.
– A display appears on the computer screen as soon as the connection is
made.
Note:
If the player is connected to the computer, you can select »
playback mode. The player icon then goes out on the computer screen. If
you want to transfer data again, you must connect the player to the compu-
ter again.
« to switch to playback mode.
-----------
« to switch to