PHONE CHARGER JACK
Your FR 1000 Series can be used to charge a mobile phone by the
DYNAMO CRANK, or AC Adapter thru the PHONE CHARGER Jack.
• Set the BATTERY SOURCE switch to DYNAMO-ADAPTER posi-
tion.
• Open the PHONE CHARGER jack rubber cap on the side radio.
• Attach a Charging Cable (not included) to the mobile phone.
• Connect the other end of the Charging Cable to the PHONE
CHARGER jack of the FR 1000.
• Recharge the mobile phone battery by turning rapidly the DYNAMO
CRANK, or by attaching the AC Adapter in the Charging jack.
Note: Charging a mobile phone through the Phone ChargerJack is
intended for emergency purpose only. It is not intended for recharg-
ing fully a discharged battery.
""
f(f
r---
~
~OC0
l~J
CHARGER -...
+
~
I - - -
.h
/ .